1. Pressure: If the pressure is not enough or too large, adjust the pressure adjusting knob after the calibration machine to increase the pressure in a clockwise direction; otherwise, reduce the pressure;
2. Time: When the hot stamping time arrives but the buzzer does not sound or keeps sounding, if you are not feeling well, you must adjust it to an appropriate position;
3. Temperature: When the adjusted temperature is reached, the pointer of the thermostat will point to the "180℃" position (approximately 5 minutes to reach). If the thermometer is turned on and the heating plate does not heat up, please check the circuit.
4. When the handle is pushed down to the end, let go of the hand and the handle automatically rises. Please adjust the adjustment knob down.
5. When the hot stamping is completed and the handle is lifted up and feels difficult, the adjustment knob can be adjusted downwards.
