1. Plug in the power supply by hand, turn on the power switch, and the power indicator will light up immediately.
2. Adjust the thermostat to the required temperature. After the temperature reaches the set temperature, the indicator on the upper part of the thermostat goes out, and you can start working at this time.
3. Adjust the time controller to the required time.
4. Put the clothes flat on the lower ironing board, and then put the heat transfer paper (note the front and back of the heat transfer paper), and press the handle down firmly until the end. Note: Do not force more than 30 kg, otherwise the handle may be deformed.
5. When the controller time to indicate the hot stamping time is up, the buzzer will sound, and the handle will be lifted to the original position.
