When we occasionally encounter defects on the transfer surface of the vacuum wood grain transfer machine, we must stop the equipment and find out the reason. For example, there are fine granular defects on the surface of the transfer material, and the hand feels not very smooth. How should we deal with it?
1. Steel-wood doors or other transfer objects are not cured before transfer, and the countermeasures: sandpaper and re-plasticize.
2. The plasticizing time is short, causing the transfer paper to penetrate the bottom, and the treatment is symmetrical: increase the plasticizing time, and put it into the wood grain transfer machine for transfer after it is completely dried.
3. There is oil stain on the surface of steel-wood doors or other transfer materials, symmetrical: do a good job of cleaning before transfer
4. The pressure is not enough. Check the pressure of the wood grain transfer machine before transfer.
