1. The wooden door transfer machine is a special person operating equipment, and the novices must be trained and passed the examination before they can start operation.
2. Standard dress, no clothes or accessories with safety hazards are allowed.
3. The operator must check the safety device before turning on the equipment. If there is a fault, it is prohibited to use it. After adjustment, it can enter the production and processing link normally.
4. Don't put into production immediately after turning on the equipment every day, there should be 3-5 minutes of warm-up time.
5. Set the processing parameters in a reasonable and standard manner, and must not exceed the nuclear load.
6. Consumables such as heating wheels should be replaced in time if they reach a certain level after long-term use.
7. Do a good job of cleaning and cleaning every day, and regularly maintain the wooden door transfer machine in accordance with the maintenance instructions.
8. Regularly check the equipment, check the performance, and solve the problems in time, so as to prevent problems before they happen.
9. Non-professionals are prohibited from disassembling the equipment.
