1.The appearance of the sublimation product has quality problems,such as high temperature resistance,sticky paper or mucous film,etc.
2.If the sublimation glue is used,the quality of the sublimation glue,the ratio of concentration and the amount of brushing will directly affect the peeling.After powder spraying, the powder spraying layer on the surface of the transferred substrate is not completely cured,causing it to be cured again during sublimation.
3.If the sublimation glue is used,the quality of the sublimation glue,the ratio of concentration,and the amount of brushing will directly affect the peeling.If heat transfer glue is used,it is recommended to add a release agent(also known as silicone oil)in the heat transfer glue to deal with the problem of paper peeling.
4.The sublimation paper is fragile or the zoom phenomenon is usually caused by the transfer baking temperature is too high or the time is too long to form the sublimation paper or the thermal transfer film is too fast aging.
